Fresh Concrete Driveways in Bathurst, NSW
0478 790 051
Bathurst Concreting
Picture a modern driveway with a stamped pattern that connects your garage to your street. At Bathurst Concreting, we make this a reality for homeowners and businesses by installing fresh, solid driveways for them across Bathurst, NSW. Whether you’re looking to install a brand new driveway for your home, pour one that connects your business’s car park to the road, or repair any issues on your existing driveway, our local team here in Bathurst is ready to help you out.
Our concreting team takes you through the entire installation process from thorough site preparation and excavation through to the pouring and reinforcement of your concrete. This way, you can trust our team to deliver a surface that is able to handle the load of your vehicles and holds up throughout Bathurst’s tough seasons.
Different Types of Driveways
Driveways take a lot more punishment than almost any other surface that your property has. Vehicles can put a lot of pressure on your driveway, and the cold weather in Bathurst can cause concrete on your driveway to shrink. Different materials have different pros and cons, but we’ve found nothing to beat concrete when it comes to getting a solid driveway.
Gravel driveways tend to shift and spread underfoot, which creates an uneven surface and a rough ride when driving on them.
Asphalt, on the other hand, tends to soften when exposed to the sun and is more susceptible to cracking during the winter.
Concrete keeps the balance and handles traffic and weather without breaking down or shifting from pressure. If a concrete driveway has been laid properly, it can last over 30 years.
Our concreting experts in Bathurst ensure your concrete ends up strong and durable by adjusting your concrete mix to the local Bathurst climate, then allowing it to cure optimally to retain as much strength as possible. This leads to a driveway that is strong and durable, and requires fewer repairs compared to a poorly laid driveway.
Solid Subbase Preparation
Your concrete isn’t the only thing that makes your driveway last. It does help provide a strong surface that prevents dusting and deterioration in the long term, but it needs to be supported by a strong foundation underneath. Without a compacted base, or even one that was poorly done, you can have an uneven base that doesn’t spread any external pressures across your concrete and can cause cracking and sinking even if the concrete mix is optimal. Skipping a solid base preparation can lead to your driveway failing early on. Our concreting experts install a solid foundation during site preparation. After excavating your space to the right depth, we add crushed rocks and gravel in an even fashion that acts as a subbase. Once that is done and rebars are added on top, we pour your concrete mix, which hardens over a solid, crushed subbase. This ends up leading towards a negation of external pressure as your concrete sits on top of a solid subbase supporting it.
Adding Proper Reinforcement
Concrete is a hardy surface, but under strong pressure, they can crack as your concrete is forced to flex. Adding proper reinforcement to your concrete driveway slab holds it together when your ground shifts or heavy vehicles roll over your concrete. The right reinforcement allows your concrete to bend and flex slightly without completely snapping and forming cracks. Our concreters uses steel mesh and reinforcement bars (rebars), that act as reinforcement for your concrete. Depending on what your driveway will be exposed to on a frequent bases, different types of reinforcement will be used. A driveway hosting heavy vehicles like trucks will need a thicker rebar whilst regular hatchbacks and sedans can thrive of thinner steel mesh. Our team will discuss this with your to choose the right reinforcement that does the job.
Drainage For Driveways
If you’ve got any liquid sitting on your driveway, from oil, to water, and chemicals, these can seep in and pool over time. It softens your base and shrinks your concrete during the winter, which can cause internal damage. Our concrete contractors build a slope at the right gradient to allow each driveway to be drained away from your structure and towards the street and into the nearest manhole for your property. Our team also conducts a thorough site assessment for any drainage problems before work begins. Good drainage is designed at the start and is hard to fix once you’ve got concrete down.
Whether you need a new driveway for your home or a heavy-duty surface for your business, our team at Bathurst Concreting is here to help. We work with residential and commercial clients throughout Bathurst, NSW, to install driveways for them. Contact us today if you’d like to book a site visit and get a quote for your driveway project.
Types of Concrete Driveway Finishes
Not every driveway will look the same. The type of finish you choose for your driveway for your space ultimately depends on how you’d like your driveway to look and feel, your budget, as well as safety when walking on your driveway. You’d have to think about practicality as well as appearance when choosing your finish. Getting a balanced mix of both is what we suggest, so you end up with a driveway that suits the aesthetic you’d like for it, and you’re also happy with the maintenance needed for it. Our team can help you choose a driveway style suited for your property and budget whilst making sure that it is built properly underneath. The finish at the end is what you see and the final touch to your driveway after it has been poured.
Plain Concrete Driveways
Plain concrete is probably the most common option that we get. It is a minimalistic option that is clean and simple, and affordable. With that said, it is also slippery when wet and easily shows oil stains and hairline cracks.
Exposed Aggregate Driveways
This driveway reveals pebbles and small stones in the concrete mix, which gives it a textured look and feel. These driveways are highly durable and has excellent slip resistance, it is naturally more expensive to get however.
Broom Finish
A broom finish gives a grey finish with fine parallel lines created by dragging a broom on wet concrete. This is a fairly budget-friendly choice, next to plain finishes, whilst giving some traction for grip.
Stamped Driveways
Stamped concrete is created when pressing your wet concrete with patterned mats that give a high-end look like cobblestone or slate. This gives a more customised look at a lower cost, but can still be slippery when wet unless a top coat with non-slip additives is added.
If you’re ever unsure about which driveway best suits your place, our team can walk through your options and explain what works best for your setup. We look at how your driveway will be used and the look you’re after before recommending the best driveway type for you. Contact us today if you’d like strong and durable driveway suited with your desired look.
FAQs
How much is concrete per m² in NSW?
In regional NSW, the average cost for a professional concrete installation typically ranges from $100 to $160 per square meter.
- Plain Concrete: $100 – $120 per m²
- Reinforced Concrete: $120 – $150 per m² (Recommended)
- Decorative (Exposed Aggregate): $150 – $200+ per m²
Note: Prices in Bathurst, NSW may fluctuate slightly based on site accessibility and the distance the "ready-mix" truck has to travel from the plant.
Do concreters need a license in NSW?
Yes. In New South Wales, any person carrying out residential building work (including concreting) valued at more than $5,000 (incl. labor and materials) must hold a valid contractor license from NSW Fair Trading. Always check your contractor’s license number before signing a contract to ensure you are covered by Home Building Compensation insurance.
What is the 4-2-1 rule for concrete?
The 4-2-1 rule is a traditional ratio for mixing standard-strength concrete. It stands for:
- 4 parts Gravel (Aggregate)
- 2 parts Sand
- 1 part Cement
This ratio provides a solid balance of strength and workability. For structural slabs in New South Wales, most professionals use a pre-mixed 25MPa or 32MPa concrete from a local plant to ensure consistency against the local freeze-thaw cycles.
How much will a 20x20 concrete slab cost?
It depend if you're measure in feet or metres.
- 20ft x 20ft (~37m²): This is roughly a standard double-garage size. You can expect to pay between $4,000 and $6,000 for a reinforced slab.
- 20m x 20m (400m²): This is a massive industrial-sized slab. A professional pour of this scale would typically range from $45,000 to $65,000+, depending on the thickness and the amount of steel reinforcement required.
How high are concrete slabs?
"Height" usually refers to the thickness of the slab. Standards vary by the intended use:
- Patios/Footpaths: 75mm – 100mm thick.
- Residential Driveways/Sheds/Garages: 100mm - 150mm thick (with SL72 or SL82 mesh).
- Heavy Vehicle Industrial Slabs: Depends, but can exceed 200mm tohandle heavy machinery and poor soil conditions (Clay in Orange, NSW).
How far will a 20 kg bag of concrete go?
A standard 20 kg bag of pre-mixed concrete doesn't go very far! One 20 kg bag yields approximately 0.01 cubic meters of wet concrete.
To cover 1 m² at a standard depth of 100mm, you would need roughly 10 to 11 bags. If you are just doing a small patch or post-hole, a few bags are fine. For a full slab, ordering a truck is significantly more cost-effective. That's where our concreting services come in, to tackle larger scale jobs you've got.
Do you find yourself staring at piles of junk and clutter in your home or office, wondering how to get rid of it all? Look no further! Bathurst Concreting is here to rescue you. Whether you need to declutter your home, clean out your garage, or dispose of unwanted furniture, our junk removal company in Bathurst, NSW has got you covered.
Contact Info
Address: 1/112 Keppel Street, Bathurst NSW 2795
Phone: 0478 790 051
Email: [email protected]
Service Hours: Monday to Friday 6:00 AM - 6:00 PM